7U4472 - Aruba 277 Instant Access Point

See Our Holiday Hours

Aruba 277 Instant Access Point 7U4472
Aruba 277 Instant Access Point 7U4472
Aruba 277 Instant Access Point

Aruba 277 Instant Access Point

SKU: 7U4472
|
Weight: 7 lbs.

Data Transfer Rate 1.3Gbps
MIMO 3x3:3
Power PoE AC
Radio Band Dual
Wireless Type 802.11 a/b/g/n/ac
Environment Indoor/Outdoor

Product Highlights

Aruba 277 IAP, 2.40 GHz 5 GHz, 802.11ac, 1.30 Gbit/s, 3 x Antenna, MIMO

Aruba 270 Series Access Point

Innovative and aesthetically-designed, our 270-series outdoor APs deliver fast and reliable 802.11ac Wi-Fi performance under any weather conditions.

The three-stream 270 series also enables 802.11n mobile devices to operate up to three-times faster at the same distance from the AP.

Purpose-built for the harshest outdoor environments, 270-series APs can withstand extreme temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants.

Models

AP-275 and IAP-275

  • 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three integrated omni-directional antennas

AP-274 and IAP-274

  • 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three external antenna connectors

AP-277 and IAP-277

  • 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and three integrated 80° H x 80° V beamwidth directional antennas

Wireless Radio Specifications

AP type: Outdoor, dual radio, 5-GHz 802.11ac and 2.4-GHz 802.11n

In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate to deliver up to 600 Mbps.

3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate

Supported frequency bands (country-specific restrictions apply):

  • 2.4000 GHz to 2.4835 GHz
  • 5.150 GHz to 5.250 GHz
  • 5.250 GHz to 5.350 GHz
  • 5.470 GHz to 5.725 GHz
  • 5.725 GHz to 5.875 GHz

Available channels: Dependent upon configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies:

  • 802.11b: Direct-sequence spread-spectrum (DSSS)
  • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
  • 802.11n/ac: 3×3 MIMO with up to three spatial streams

Supported modulation types:

  • 802.11b: BPSK, QPSK, CCK
  • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (with TurboQAM clients)
  • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit power: Configurable in increments of 0.5 dBm

Maximum (aggregate, conducted total) transmit power (limited) by local regulatory requirements):

  • 2.4-GHz band: +28 dBm (23 dBm per chain)
  • 5-GHz bands: +28 dBm (23 dBm per chain)

Supported data rates (Mbps):

  • 802.11b: 1, 2, 5.5, 11
  • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
  • 802.11n: 6.5 to 450 (MCS0 to MCS23, 1 to 3 spatial streams)
  • 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, 1 to 3 spatial streams