Laird 10x10 Inch IP-54 Rated Left Hand Circularly Polarized RFID Antenna
| Environment | Indoor |
| Gain | 8.5 dBiC |
| Polarization | Left Circular |
| RFID Frequency | UHF |
Product Highlights
Laird S8658PL96RTN: 10x10 inch IP-54 Rated Left Hand Circularly Polarized RFID Antenna with 96 inch Pigtail RPTNC-M - ETSI MNF# S8658PL96RTN
Spec. Sheet
Laird RFID Antennas
Laird RFID antennas offer high-performance solutions for RFID applications. With advanced technology and design, they ensure reliable data capture and transmission, enabling seamless integration into various systems. From industrial to retail settings, Laird antennas optimize RFID performance, enhancing efficiency and accuracy in inventory management and asset tracking. Use our Free online Chat or simply Call to speak with a RFID expert.
The S8658PL96RTN is the industry standard antenna for passive UHF RFID installations. This unit is a circularly polarized 10x10 inch panel with reception and transmission in the ETSI: 865-868 MHz frequency band and operates at 8.5 dBic gain. It is built with a pre-installed 96 inch / 8 foot pigtail and RPTNC-Male connector. Equivalent to: Motorola Zebra AN480 and Impinj IPJ-A1000-EU1, IPJ-A1001-EU1. *A note about Antenna Polarity:
For most RFID applications, right and left hand polarity antennas may be used interchangeably.
Specifications
| SKU | S8658PL96RTN |
|---|---|
| Manufacturer | Laird |
| Antenna Category | RFID (865-928 MHz) |
| IP Rating | 54 |
| Polarity | Left Hand Circular |
| Gain | 8.5 |
| Horizontal/Azimuth Beamwidth | 70 |
| Vertical/Elevation Beamwidth | 70 |
| Connector Type | Cable - Bottom Entry |
| Connector 1 | RP TNC-Male |
| Cable Length (inches) | 96 |
| Cable Length (mm) | 2438 |
| Height/Length (inches) | 10.2 |
| Height/Length (mm) | 259 |
| Operating Temp (celsius) | -30 to +70 |
| Thickness/Diameter (inches) | 1.32 |
| Thickness/Diameter (mm) | 34 |
| Width (inches) | 10.2 |
| Width (mm) | 259 |
| Weight (lbs) | 1.75 |
| Weight (grams) | 1130 |
| Material | ABS Housing |
| Mount Style | (4) 1/4-20 Threaded Studs at 63.5 mm / 2.5 inch spacing |
| Includes | 4 each: flat washers, lock washers & hex nuts |
| Product Condition | New |