Cab S1000-300 Applicator
| Part Type | Applicator |
Product Highlights
CAB, S1000-300 Applicator Only, Cylinder Stroke 11.8 inch (300 mm), Pad Stroke Below Device 5.6 inch (144 mm), Required for Mounting On a Cab SQUIX Peel-Off Printer Provides a Cost-Effective Solution if Operated Semi-Automatically or Integrated in Vertical Orientation in Production Lines
This CAB Product May Have a Lead Time. Contact Us to Check Availability in Advance, or to Discuss Your Cab Printer Project.
Spec. Sheet
CAB S1000 Applicator - Labeling in real time
A S1000 assembled to a CAB SQUIX peel-off printer provides a cost-effective solution if operated semi-automatically or integrated in vertical orientation in production lines. A stroke cylinder applies the labels to products.
Long service life. The ball bearing guide bars are low-wear.
Products of different heights can be labeled by means of a stroke cylinder. Various stroke lengths are provided.
Compressed air regulation unit. Micro filters prevent from contamination. Regulating the pressure ensures a permanent good labeling quality.
Highly-reliable processes. The supporting air, intake air and stroke speed may be adapted. If sensitive products and packaging are in use, the pressing force can be reduced to less than 10N (2.2 lbs). To prevent intake ducts from contamination, they get purged after any labeling.
Label sizes. Labels 1 inch to 7 inches wide and 1 inch to 7.8 inches high can be applied.
Supporting air to blow labels onto a pad
Pad. Labels are transferred to a pad and held there by vacuum. They move towards a product uby means of a stroke cylinder.
Pre-dispense button to verify a labeling process. By pushing the button once, a label is printed and transferred to the applicator. By pushing the button once more, labeling is triggered.