See Our Holiday Hours

Take-A-Label TAL-3100T Tamp Label Applicator

The TAL-3100T was the first label applicator to be introduced into the TAKE-A-LABEL line. That was over twenty years ago. Since that time, the unit has received several revisions as TAL strives to enhance performance and function. The Model TAL-3100T has been designed and built from the ground up to be a very simple to operate high accuracy label applicator. Designed to be efficiently operated by any operator, the TAL-3100T will provide accuracy of +/- 1/16" or better. The TAL-3100T can label both flat and semi-flat products.

Spec Sheet
Result: 4

  • Take-A-Label TAL-3100T Tamp Label Applicator 31700

    Take-A-Label TAL-3100T Tamp Label Applicator

    ( SKU: 31700 )

    Take-A-Label  »  Tamp Label Applicators

    For New Label Applications BarcodeFactory will provide a free test of your label applied to your product, and provide a video and report of the results. This testing is recommended on all new applications of print to apply to ensure success of your project.

    Item May Have Up to a 10-Day Lead Time. Please Contact Us for an Estimate or Quote.

    This Product Ships Via Truck on a Pallet. Freight Quote Required. Contact us to request a quote.

    Take-A-Label, TAL-3100T, Photo cell label stop, Maximum roll diameter 12”, Universal square corner product fixture, Core sizes of 1” or 3”, Heavy duty all steel frame with powder coated finish, Minimum label size ½” x ½”, Solid state electronics, Maximum liner width 5”

    $4798.00

    Quantity Discounts
    2+
    Contact
  • Take-A-Label TAL-3100T Label Applicator 31700-07

    Take-A-Label TAL-3100T Label Applicator

    ( SKU: 31700-07 )

    Take-A-Label  »  Round Product Label Applicators  »  TAL-3100T

    For New Label Applications BarcodeFactory will provide a free test of your label applied to your product, and provide a video and report of the results. This testing is recommended on all new applications of print to apply to ensure success of your project.

    Item May Have Up to a 10-Day Lead Time. Please Contact Us for an Estimate or Quote.

    This Product Ships Via Truck on a Pallet. Freight Quote Required. Contact us to request a quote.

    Take-A-Label, TAL-3100T - Accuracy +/- 1/16 Inch - Minimum Label Size: 1/2 Inch x 1/2 Inch - Maximum Label Size: 5 Inches x 7 Inches - Maximum Roll - Diameter: 12 Inches - Core Size: 1 Inch or 3 Inches, P/N 31700*07

    Replaced Product >>
  • TAL-3100T Label Applicator 31700-hotstamp

    TAL-3100T Label Applicator

    ( SKU: 31700-hotstamp )

    Take-A-Label  »  Round Product Label Applicators  »  TAL-3100T

    Take-A-Label, TAL-3100T - Accuracy +/- 1/16 Inch - Minimum Label Size: 1/2 Inch x 1/2 Inch - Maximum Label Size: 5 Inches x 5 Inches - Maximum Roll - Diameter: 12 Inches - Core Size: 1 Inch or 3 Inches - With Pop-2 Hot Stamp
    For New Label Applications BarcodeFactory will provide a free test of your label applied to your product, and provide a video and report of the results. This testing is recommended on all new applications of print to apply to ensure success of your project.